STUDENT INFORMATION

Award issued - PUASAR022A Participate in a rescue operation

It is recommended this unit be renewed every 12 months in line with industry standards. Locate the most current training package at training.gov.au  

Our obligation to you

We are required to provide clear evidence to enable you to decide if this course is suitable for you. This course teaches the skills and knowledge required to participate in rescue operations as a member of a rescue team for a wide range of rescue and environmental situations, which may include industrial, rural, bush and extreme environmental conditions.

There are also specific industries that require additional training such as emergency services.

Allens Training Pty Ltd RTO 90909 is responsible for the quality of the training and assessment and will be issuing the statement of attainment for this unit even if the training is provided by Cardiac Safe.


Are there physical requirements for this course?

It is important to note that there are physical standards which relate to the level of performance required when undertaking accredited training.

One requirement of the training package is that you are to be assessed as physically capable of working under supervision in a team but may be responsible for completing individual tasks relating to a rescue in a range of simulated and real locations.

There can be no exceptions to these Australian Government requirements that are clearly written into the Training Package. Therefore, students who are unable to satisfy the physical requirements of the course cannot be deemed competent or issued with a statement of attainment, even if the qualification is a necessary part of their employment conditions.

Resources that will be available for this course  

- PPE in accordance with organisational requirements

- Rescue equipment


DETERMINING AMOUNT OF TRAINING - TARGET STUDENT AND COURSE DELIVERY OPTIONS

Student cohort (types of students)

Allens Training Pty Ltd is required to determine the amount of training they provide to each student, with regard to the existing skills, knowledge and experience of the student. This is achieved by identifying the cohort category or the student undertaking the proposed training and also the mode/s of delivery being provided. Skill levels will vary in relation to the type of student or ‘cohort’. 

Allens Training Pty Ltd have identified 2 different types of cohorts as listed below. 

1. Students new to the training

2. Students with previous training and/or experience similar to this course


Initial training and modes of delivery (students new to the training)

Initial training is intended for students who have no prior training or experience. For example job seekers, school leavers, those wanting a change in career etc. Students attending a course for the first time can complete the course in 2 ways.  Either by undertaking pre-course study - referred to as unsupervised learning, and then attending a trainer led face to face course (mixed mode) or by attending a longer period of training (face to face).

Where the student cohort consists of new entrants or inexperienced workers, we ensure that we give them the opportunity to fully absorb the required knowledge and to develop skills over time in the different contexts they would experience in the workplace.

This may require a longer time-frame than for those students with significant training/industry experience.


Refresher training and modes of delivery (Students with previous training and/or experience)

The shorter refresher course may be appropriate for workers or students experienced in the industry or with previous training.  This might be those who have been in the industry for some time (e.g. well practiced skills), those who have previously completed this course or similar, and those returning for workplace or industry requirements and to refresh their skills etc. 

Meaning the student cohort for a refresher course is comprised of students who have previously attained experience in the required skills/knowledge.

It’s important to identify those students who are confident and are returning for recertification. It’s about recognising their pre-existing knowledge and skills. Therefore, upon enrolment, a refresher student can supply evidence of previous certification and therefore will be given the option of completing optional unsupervised pre-course study to refresh their knowledge and the complete a face to face training session with a trainer (mixed mode or express mode).

Recertification/refresher training is a competency confirmation event that includes training, the purpose of which is to compensate for or prevent deterioration in a previously achieved standard of performance.

Course times 


Pre-course study

If there is pre-course study for the course, it is found in the student portal. Students must have access to a computer, phone, tablet etc. with access to the internet to complete the pre-course study online.

What does competency-based training actually mean? 

A competency-based training environment is centered on demonstrated competence against industry-defined standards of performance. Competency-based training is the concept that individuals learn at different rates as well as through different modes and different environments and that the skills and knowledge that a student has acquired previously are able to be formally recognised.

Amount of training and the AQF volume of learning

The AQF Volume of Learning describes how long a student, who does not hold any competencies identified in the qualification, would normally take to develop all of the required skills and knowledge at that qualification level. The amount of training comprises the formal learning activities that are provided to a student to enable them to meet the requirements of each training product and gain the skills and knowledge specified in the relevant training product.

Exceptions for duration of the course

Course durations are reflective of group sizes of between 4 and 15 students. If there are less students in a group, you may find course duration reduced by a maximum of 10%. If a class size exceeds 15 students, it may therefore also be necessary to increase course duration depending on the number of students.

Recognition or any prior learning or previous courses 

Upon enrolment, you are given the opportunity to upload your previous certificate and based on that evidence, the course can be modified based on your previous knowledge. There is a currency requirement to be able to demonstrate skills such as basic life support.

We need to identify any support you require to complete this course 

Upon enrolment, we will give you an opportunity to provide information on your language, literacy and numeracy skills to complete this course. There is also the opportunity to provide details and communicate any special needs or support requirements you may have.  Assistance can be sought from our student support officer at Allens Training Pty Ltd by phoning 1300 559 064.

We provide equitable access to all required educational and support services, so that no student is disadvantaged to be able to enroll into this course regardless of their mode of study or location. Students can organise to meet with their trainer on a one-to-one basis for additional support, plus email and phone contact.

It’s important to note that there is a physical requirement to complete all steps required for a rescue operation as part of a team.


Unique Student Identifier (USI)      

Completing any vocational education course in Australia, it is a requirement for you to obtain and supply a USI. This is obtainable from usi.gov.au If a USI is not supplied and verified with usi.gov.au a certificate cannot be issued to you.


If you are under 18 years of age

It is a requirement that parental/guardian consent is obtained for students under the age of 18 to be able to participate in a course.  The form for this can be found here.


Foundation skills required

Foundation skills are the underpinning communication skills required for participation in the workplace, the community and in adult education and training.

- Learning – to learn to undertake rescue activities

- Reading – in order to read and understand work related tasks, documentation, policies, procedures and manufacturer instructions to make accurate reports.

- Writing – in order to make reports and compete forms

- Oral communication – to employ reporting, communication and information-gathering techniques

 Other foundation skills essential to performance are explicit in the performance criteria of this unit.

 

Reasonable adjustment explained

Reasonable adjustment refers to flexibility in assessment approaches to account for individual learning needs, while still adhering to the assessment requirements of the relevant training package or VET accredited course. Whilst reasonable adjustments can be made in terms of the way in which evidence of performance is gathered, the evidence criteria for making competent/not yet competent decisions should not be altered in any way.

If a student meets essential entry requirements, the RTO must endeavour to make ‘reasonable adjustments’ necessary for them to complete their course work or demonstrate competency. This may include adjusting the physical environment, student learning materials or the manner that a theory test is completed. In most situations, a student with a disability will be able to tell the RTO what he or she needs to be able to study. If necessary, the RTO should also seek advice from disability areas within government departments or organisations that represent or provide services to people with a disability.

Adjustments may include:

Modifying educational premises. For example, making ramps, modifying toilets and ensuring that classes are in rooms accessible to the person with a disability.

Modifying or providing equipment. For example, lowering lab benches, enlarging computer screens, providing specific computer software or an audio loop system.

Changing assessment procedures. For example, allowing for alternative examination methods such as oral exams, or allowing additional time for someone else to write an exam for a person with a disability.

Changing course delivery. For example, providing study notes or research materials in different formats or providing a sign language interpreter for a person who is hearing impaired.

Please note that in some Training Packages, first aid and CPR training for example, there are mandatory skills that cannot be modified as a reasonable adjustment. The student is required to complete 2 minutes of adult CPR on a manikin on the floor. There is no room for reasonable adjustment as it is stated as what is required in the Training Package.

 

ASSESSMENT – THEORY - Question paper

You will be assessed on your knowledge of the:

- Capabilities and limitations of rescue equipment

- Casualty handling techniques

- Environmental hazards

- Manual handling techniques

- Organisational policies and procedures (such as relevant legislation; operational, corporate and strategic plans; operational performance standards; operational policies and procedures; organisational personnel and occupational health and safety practices and guidelines; organisational quality standards; organisation's approach to environmental management and sustainability)

- Personal hygiene requirements

- Procedures for reporting injuries and accidents

- Relevant legislative and regulatory requirements

- Types of ropes and knots

- Safety precautions

ASSESSMENT – PRACTICAL - Physical demonstrations (skills)

The simulated assessment environments will reflect the real-life working environment where these skills and knowledge would be performed, with all the relevant equipment and resources of that working environment.  Skills must be demonstrated by the student working individually in an environment that provides realistic in-depth, industry-validated scenarios and simulations to assess students’ skills and knowledge.

It’s important that students have knowledge of the content of this course. The assessable practical skills are listed below.

You will be assessed on performing rescue scenario and task demonstrations to:

-  Select and don PPE

-  Protect the casualty

-  Undertake safety precautions

-  Understand ropes and knots          

-  Understand select and use rescue equipment

-  Perform a rescue operation of a person in a dangerous situation - preparation and risk assessment / perform rescue / conclude operations as part of a team

-  Complete an incident report

 

Student written agreement

If you are completing this course, please download the student agreement to ensure that you are aware of your rights and obligations.  You can access the student written agreement by clicking here.

Course requirements          

There is a prerequisite of PUAEME001B Provide emergency care or HLTAID002 Provide basic emergency life support (previously HLTFA211A) or equivalent qualification 

We engage with industry experts  

As part of ongoing improvement activities and industry consultations, Allens Training Pty Ltd consult with industry experts to ensure best practice occurs in resources and realistic assessment tools.

Training considerations from the trainer and assessor

The RTO’s training and assessment strategies and practices, including the amount of training they provide, are consistent with the requirements of training packages courses and enable each student to meet the requirements for each unit of competency or module in which they are enrolled.

RTO responsibilities           

The RTO is required to:

- Have qualified trainers and assessors to deliver the training and assessment.

- Educational and support services to meet the needs of the student cohort/s undertaking the training and assessment.

- Learning resources to enable students to meet the requirements for each unit of competency.

- Facilities, whether physical or virtual, and equipment to accommodate and support the number of students undertaking the training and assessment.

Monitoring and improvement        

Continuous improvement will occur through ongoing industry consultation, feedback from students, and feedback from clients. Feedback for this training program is collected through:

- Employer questionnaire managed by the Allens Training Pty Ltd head office.

- Every student is given the opportunity for post course survey and these survey results are available for both the trainer and RTO to view.

- Feedback is collected, analysed and actioned. Identified actions are documented.



 

   Cardiac Safe delivers nationally recognised training in partnership with Allens Training Pty Ltd RTO 90909